PREMIER DOORS FOR METAL BUILDINGS

SERIES S20-4 (1-3/4” POLYSTYRENE CORE)
SERIES P20-4 (1-3/4” POLYURETHANE CORE)
SERIES H20-4 (1-3/4” HONEYCOMB CORE)

SPECIFICATIONS

Doors shall be furnished by Products, Inc.,Monroe, LA, fabricated from minimum spangle hot dipped smooth or textured Galvannealed steel, mill treated for proper paint adherence. Door steel shall be smooth surface for prime painted doors and leather grain textured for pre-finished doors.

SERIES S20-4 Reversible doors shall have a pre-foamed polystyrene slab of 1.0# test density filling the inside of the door. The core shall be secured to the face sheets with adhesive. “U” Factor = .153c -”R” Factor = 6.54c.

SERIES P20-4 shall have a foamed-in-place urethane core that completely fills the inside of the door. The core shall be closed cell and waterproof. “U” Factor = .079c – “R” Factor = 12.64c.

SERIES H20-4 Doors shall have honeycomb cores. The honeycomb core shall be 99# test impregnated with water resistant resin and shall have a crush strength of 55 psi. The core shall be secured to the face sheets with an adhesive. “U” Factor = .42c -”R” Factor = 2.38c.

Reversible doors shall have 20 gauge Galvannealed face sheets with top and bottom channels closed flush. The lock edge reinforcement shall be 14 gauge. Each hinge reinforcement shall be 9 gauge steel minimum projection welded in six places.

Doors shall be beveled 1/8” in 2” on lock edge for neat fit and security with 1/8” clearance at head, 3/32” clearance at jambs, 1/4” clearance at meeting edyes of pairs and 3/4” floor clearance.

Standard hardware preparations are 4-1/2,” x 4-1/2,” (.134) standard weight hinges, conforming to ANSI A156.7 and ANSI A115.1 for Series 1000 mortise locks (Gov. 86) or ANSI A115.2 for Series 4000 cylindrical locks (Gov. 161). Other hardware reinforcements are available upon request.

All doors shall be chemically treated with a metal prep wash primer to produce a long lasting surface.

All pre-finished White or Bronze textured doors shall be packaged with a polybag and fully cartoned to protect the finish. Each door shall then be banded in three places. Part Number and Description shall be placed on leading edge, approximately center line from top and bottom of door. Doors shall be palletized in lots of 20 doors per pallet for shipment and storage.

 RESOURCES

• Reversible doors for metal buildings
• Reversible frames for metal buildings
• Quality door and window systems
• Severe windstorm rated doors
• Severe windstorm rated door frames
• Door and frame Handing Chart
• Door, frame, and hardware manual for metal building